Mobile Network Settings - Zte WARP 7 User Manual

●
Pairing Bluetooth Devices: Make sure the other devices are set to be discovered. From
Bluetooth settings, tap the device name in ―Available devices‖ and follow the onscreen
instructions.

Depending on the device, you may be required to enter or accept a passkey.

If the target device does not appear, tap Menu

This setting is available when Bluetooth is enabled.
●
Change the Name of a Paired Device: From Bluetooth settings, tap Settings
paired device name, tap the current name, enter a new name, and tap OK.

Emoji cannot be used in a device name.

This setting is available when Bluetooth is enabled.
●
Canceling Pairing: From Bluetooth settings, tap Settings
then tap Forget.

This setting is available when Bluetooth is enabled.
●
Enable Service from Paired Device: From Bluetooth settings, tap Settings
device name, and then tap the listing under Use for.

If a confirmation prompt appears, follow the onscreen instructions.

This setting is available when Bluetooth is enabled.

This setting is available when the paired device is providing a service.
●
Search for Other Devices: From Bluetooth settings, tap Menu

This setting is available when Bluetooth is enabled.
●
Check Files Received via Bluetooth Transfer: From Bluetooth settings, tap Menu
received files, and follow the onscreen instructions.

Mobile Network Settings

The Mobile networks options let you enable your phone's mobile data access and set your preferred
network mode.
Settings
> Refresh to search again.
next to a paired device name, and
> Refresh.
next to a
next to a paired
> Show
236