Danfoss CFZ Instructions For Use Manual page 9

You can set and change your time programmes by using the
keys on your Zone Regulator.
How to move the marker
Down through the display
Into a line...
... and then along a line.
How to change values
Registers/unregisters room thermostats or sets and changes
heating periods
Room thermostat numbers are linked (and can thus only
occur in one heat zone) if a room thermostat is registered on
several outputs in the regulator box.
A room thermostat can only be registered on one output:
• If a room thermostat is registered on another output, it is
moved away from the old heat zone.
• If a room thermostat is unregistered on one heat zone, it
is automatically moved to the next heat zone (e.g. from
zone 3 to zone
Important! When the function
selector indicates the clock or a
zone, the temperature is regulated
on the basis of the pattern of
consumption entered, e.g. heat zone
1. If you want to be able to see the
time as a standard feature, set the
function selector on the clock.
9