Sharp DM-2000 Service Manual page 9

Status LCD display
Check
Panel
Error
Clear
Paper Path
Copies
Resolution
Smoothing
Toner Save
Page Protection
Main Menu
2-Sided Printing
Paper Source
Paper Size
Orientation
Emulation
Set IP Address
Set Subnet Mask
User
Set Default Gateway
setting
Network
Enable TCP/IP
Menu
Enable Netware
Enable EtherTalk
Reset to Defaults
PS2 Menu Print PS2 Error
Interface
I/O Time Out
Menu
Configuration Page
Test
Printing PCL Font List
Menu
PS2 Font List
b. LED display
Content
Toner empty
Drum replacement
Cover open
Service call error
Paper jam
ON LINE light
Paper exit tray full
Printing of the set
quantity is made.
Printing at the set
resolution is made.
Smoothing
function setting.
Toner save mode
setting
DATA light
Setting of page
protection function
Setting of duplex
function and
binding direction
c. Operation keys
Tray select
Paper size select
Setting of print
direction
Emulation setting
LINE key
IP address
setting is made.
Subnet Mask
setting is made.
MENU key
Default Gateway
setting is made.
ITEM key
Enable/Disable
TCP/IP
Left arrow key
Enable/Disable
Right arrow key
Netware
ENTER key
Enable/Disable
∗ Invalid when the printer is on-line.
EtherTalk
Reset Print
(5) Network board
Server Card to
default 10/100 Base TX
10 Base T/2
Setting of printing
in case of PS
Error
(6) PC environment
a. In the case of IBM PC/AT or compatible computers
If data reception
is not completed
Computer
within the set
Type
time, it is judged
Operating
as a time out
System
error.
Configuration
page is printed.
CPU
PCL6 Font page
is printed.
PS2 Font page is
printed.
RAM
2 – 5
Indicates that the printer is off-
line and data cannot be
transferred or printed. Make
settings from the operation
Extinguished
panel in this mode. Note,
however, that you cannot make
settings if the "Data Remaining"
message is displayed.
Indicates that the printer is on-
Lit line and data can be transferred
and printed.
Indicates that there is no data
Extinguished
being received or processed.
Indicates that the printer is
Lit receiving or processing print
data.
Indicates that there is print data
Blinking remaining in memory that has
not yet been printed.
Changes between the on-line and off-line
modes.
When the printer is on-line, it can receive
data from the computer with which it is
connected.
When the printer is off-line, you can use
operation panel keys to make print settings.
Note, however, that you cannot make settings
if the "Data Remaining" message is displayed.
Used to show setting menus on the display in
sequence.∗
Used to show the setting items of the
selected menu in sequence.∗
Used to change the value of any item.∗
Used to enter a new value.
TCP/IP, IPX/SPX, Ether Talk
TCP/IP, IPX/SPX, Ether Talk
IBM PC/AT or compatible computer equipped with a
bi-directional parallel interface and CD-ROM drive
Windows 95, Windows 98, Windows NT4.0
Windows 3.1
Windows 95: 486SX or better
Windows 98: 486DX/66MHz or better (Pentium or
better is recommended.)
Windows NT4.0: 486/25MHz or better
Windows 95: 8 MB or more (12 MB or more is
recommended.)
Windows 98: 16 MB or more (32 MB or more is
recommended.)
Windows NT4.0: 16 MB or more
DM-2000