Front Control Panel - LG FLATRON L2320A Service Manual

3
1. Remote Control Sensor
2. Power Button
Use this button to turn the display on or off.
<Power (DPMS) Indicator>
This Indicator lights up blue when the display
operates normally. If the display is in DPM (Energy
Saving) mode, this indicator color changes to
amber.
3. Source Button
Use this button to select an input signal
4. PIP Button
The sub-screen is changed in the
order shown below.
: SMALL -> LARGE -> OFF
The positions of SOURCE 1 and
SOURCE 2 can be transposed by
selecting SWAP on the remote control.
5. POP Button
The sub-screen is changed in the
order shown below.
: SMALL -> MEDIUM -> LARGE -> OFF
The positions of SOURCE 1 and
SOURCE 2 can be transposed by
selecting SWAP on the remote control.
Copyright 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes

Front Control Panel

4 5 6 7
• DSUB ANALOG: 15-pin D-sub analog signal
• DVI-I ANALOG: DVI-I analog signal
• DVI-I DIGITAL: DVI-I digital signal
• HDTV YPbPr: HDTV
• DVI-D DIGITAL: DVI-D digital signal
• S-VIDEO: S video
• VIDEO: Composite video
• DVD YPbPr: DVD
8
6. MENU Button
Use this button to enter or exit On Screen Display.
7. CH. -+, VOL. -+
CH.-+
• Bring up Contrast and Brightness
Use these buttons to choose or adjust items in the
On Screen Display.
8. AUTO Button
AUTO/SELECT button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode). It is available to
the PC signal inputs only.
The best display mode is 1920x1200 @60Hz.
Use this to enter a selection in the On Screen Display.
Press and hold the MENU button and VOL.+ button for 5
seconds: the message "CONTROLS LOCKED" appears.
You can unlock the OSD controls at any time by pushing
the MENU button and VOL.+ button for 5 seconds:
the message "CONTROLS UNLOCKED" will appear.
- 7 -
2 1
adjustment. It is available to the PC
signal inputs only.
VOL.-+
Use these buttons to decrease or
increase the volume level.
When adjusting your display
settings, always press the
CONTROLS LOCKED/UNLOCKED :
MENU and VOL.+
This function allows you to secure the
current control settings, so that they
cannot be inadvertently changed.
LGE Internal Use Only