Control Knobs - Jenn-Air CU 23 SERIES Use And Care Manual

Updraft convertible grill-range cooktop
Table of Contents

Advertisement

Cleaning
Other
Parts
of Your Cooktop
Control
Knobs
The knobs on the control panel can be removed with the controls in the OFF position. Pull
each knob straight from the shaft. Wash knobs in warm soapy water or dishwasher; do not
use abrasive cleansers or materials. To replace each knob, match flat part of knob opening
with the flat of the shaft, returning in OFF position.
IMPORTANT:
Never use a metal blade to pry knob off. If knob cannot be easily
removed, tuck the folds of a cloth dishtowel under the knob skirt and pull the towel upward
with steady, even pressure.
Control
Knob
Area
Use mild cleansers, such as soapy water or mild liquid sprays, such as 409. Wipe with
sponge, damp cloth or paper towel. Do not scrub with S.O.S. pads or abrasive cleansers.
Cooktop
Stainless
Steel
Cooktop
Before using the cooktop,
remove all pieces of plastic covering the top. Use a glass
cleaner to remove any film residue from the top and inside the rim area supporting the grill
basin. If residue is left on cooktop, it can be burned onto cooktop and be difficult to remove.
To
clean
stainless
steel
cooktop
surface:
• To clean light soil, wipe with soapy cloth or nonabrasive cleanser, such as Soft Scrub.
Rinse, buff with soft cloth; polish with glass cleaner if necessary.
• To clean moderate soil or discoloration of the surface (excessive heat will cause a
golden discoloration),
clean with Zud, Bar Keepers Friend, or Luneta (Jenn-Air
Model A912, Part No. 712191). With a sponge or cloth, rub cleanser with the grain to
avoid streaking
the surface.
Rinse well, buff dry; polish with a glass cleaner if
necessary to remove cleanser residue and smudge marks.
• Heavy soil, such as burned on food soil, can be removed by first cleaning as per the
instructions for moderate soil. Stubborn stains can be removed with a damp Scotch-
Brite scour-pad; rub evenly with the grain to avoid streaking the surface. Rinse well,
buff with dry cloth; polish with glass cleaner if necessary to remove cleanser residue
and smudge
marks. Scotch-Brite
is also useful in buffing and removing
minor
scratches.
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cu 240 seriers

Table of Contents