Steering Adjustment; Extendable Mirror - Kubota M6-101-M6-111 Operator's Manual

C Precautions in Using the Instructional
Seat
A When getting on the tractor
1. The operator is supposed to move the tractor onto a
flat surface and to apply the parking brake for a
complete stop.
2. A instructor, a trainee or a servicing staffer is
supposed to stand on the ground and to set up the
seat. Before use, make sure the seat is securely fixed,
and get on the tractor. In getting on the tractor,
stabilize yourself by holding the specified handrail with
attention not to get in contact with any control levers.
3. Fasten the seat belt and close the door. Then get the
door locked.
A While the machine is in motion
1. The person on the instructional seat is supposed to get
training with due care not to interfere with the
operator's actions.
2. While in training, be sure to keep the seat belt
fastened. The person on the instructional seat is
supposed to grip the handrail to prevent him or her
from getting out of balance due to violent machine
movements.
3. Run the tractor at low speed.
A When getting off the tractor
1. The operator is supposed to move the tractor onto a
flat surface and to apply the parking brake for a
complete stop.
2. The person on the instructional seat is supposed to
open the door, unfasten the seat belt and get out of the
tractor.
3. Recouple the left and right halves of the seat belt.
4. Finally, close the door.
(1) Instructional seat
(2) Seat belt
(3) Handrail
OPERATING THE TRACTOR
A The instructional seat can be used only when
permitted by your local laws.
(Consult your local KUBOTA Dealer for further
details.)
BSteering Adjustment
To avoid personal injury:
A Do not adjust the steering wheel while the
tractor is in motion.
Adjust the steering wheel to the best driving position using
tilt and telescope levers.
(1) Tilt lever
(2) Telescope lever
BExtendable Mirror
1. To alter the length: Loosen the knob bolt and move the
mirror to the required position, then tighten the knob
bolt.
2. To adjust mirror head: Hold firmly, tilt horizontally and
vertically as required.
(1) Knob bolt
37
(A) "UNLOCK"
(B) "LOCK"