Replacing Slow-Blow Fuses - Kubota M6-101-M6-111 Operator's Manual

C How to attach and detach the push-rivet assy.
A Detaching procedure
(1) Center-rivet (A) Push in the center-rivet.
(B) Pull out the push-rivet assy.
A Attaching procedure
(A) Pull out the center-rivet.
(B) Attach the push-rivet assy.
(C) Push the center-rivet.
BReplacing Slow-Blow Fuses
The slow-blow fuses are intended to protect the electrical
cabling. If any of them has blown out, be sure to pinpoint
the cause. Never use any substitute, use only a KUBOTA
genuine part.
PERIODIC SERVICE 157