Only For Training And Service Purposes - LG L704I Service Manual

2 Mega Camera module is connected to Camera FPCB with 34pin Board to Board connector
(AXK7234227G). Its interface is dedicated camera interface port in MSM6280. The camera port
supply 24.5MHz master clock to camera module and receive 49MHz pixel clock (15fps), vertical sync
signal, horizontal sync signal, reset signal and 8bits data from camera module. The camera module
is controlled by I2C port from MSM6280.
No. Name
1 GND
2 CAM_PCLK
3 GND
4 GND
5 CAM_RESET_N
6 GND
7 NC
8 I2C_SDA
9 I2C_SCL
10 NC
11 NC
12 GND
13 CAM_PWDN
14 VREG_CAM_2.7V
15 VREG_CAM_2.7V
16 VREG_VGA_CAM_2.8V
Table1_1. Interface between 2 Mega Camera Module and Camera FPCB (in camera module)
Copyright © 2007 LG Electronics. Inc. All right reserved.

Only for training and service purposes

3. TECHNICAL BRIEF
Port Note
GND GND
O Clock for Camera Data Out
GND GND
GND GND
I Camera reset signal
GND GND
NC NC
I I2C Data
I I2C Clock
NC NC
NC NC
GND GND
I Camera power down
I AF_Actuator_LVDD1_2.7V
I AF_Driver IC_LVDD2_2.7V
I CAM_AVDD_2.8V
- 61 -
LGE Internal Use Only