LG KM555 Service Manual page 102

Bluetooth RF Test procedure
1. Set phone to Bluetooth test-mode.
- Blue tooth ON : Enter Test Mode(1809#*555#)
Test
2. Insert a phone in a TEMCELL (in case of radiation test)
3. Set 'discover' after push menu button of the tester and select the link analyzer .
4. After 'set test mode', confirm the connection state.
5. Measure the power of full channel after hopping mode is selected to 'ON'
6. You can select wanted test cases after getting an optimized power
7. Blue tooth Off
- Menu(OK key) setting 4)Connectivity 1)Bluetooth 1)Turn on/Turn off
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Eng Mode
- 10 -
5. Trouble shooting
BT Testing RF
LGE Internal Use Only