Table of Contents
Advertisement
The backlight of LCD module is controlled by DBB via AAT2807 , U402. The control signals related
to Backlight LED are given bellow.
Table 3-4. DESCRIPTION OF LCD BACKLIGHT LED CONTROL
Signals
C_FLASH
(GPIO_24)
LCD_DIM_CTL
(GPO 23)
FLASH_LED
MLED
MLED[1:3]
C. RF interface
The AD6527 control RF parts through PA_BAND, ANT_SW1, ANT_SW2, CLKON , PA_EN, SEN,
SDATA, SCLK, RF_PWR_DWN.
Signals
PA_BAND (GPO 17)
ANT_SW1 (GPO 9)
ANT_SW2 (GPO 11)
CLKON
PA_EN (GPO 16)
SEN (GPO 19)
SDATA (GPO 20)
SCLK (GPO 21)
RF_EN (GPO 4)
Control flash ON and OFF
Control LCD backlight level in 16 steps
Voltage source for FLASH LED
Current source for backlight LED
This pins are returned-paths for backlight LED current
source (MLED)
Table 3-5. RF CONTRON SIGNALS DISCRIPTION
PAM Band Select
Antenna switch Band Select
Antenna switch Band Select
RF LDO Enable/Disable
PAM Enable/Disable
PLL Enable/Disable
Serial Data to PLL
Clock to PLL
Power down Input
- 27 -
3. TECHNICAL BRIEF
Description
Description
Advertisement
Table of Contents
