Declaration Of Conformity; Safety Considerations - Digitron 1100T Instruction Manual

3. EC Declaration of Conformity
This is to certify that DIGITRON 1100 series
thermometers conform to the protection requirements of
the council directive 89/336/EEC, in the approximation
of laws of the member states relating to Electromagnetic
compatibility and 73/23/EEC. The Low Voltage Directive
by application of the following standards:
EN 50081-1
EN 50082-1
EN 61010-1
EN 61010-2-031
EN 61010-2-032
To ensure conformity with these standards, this
instrument must be operated in accordance with the
instructions and specifications given in this manual.
CAUTION: Even though this instrument complies with
the immunity standards, its accuracy can be affected
by strong radio emissions not covered in the above
standards. Sources such as hand-held radio
transceivers, radio and TV transmitters, vehicle radios
and cellular phones generate electromagnetic
radiation that could be inducted into the test leads of
this instrument. Care should be taken to avoid such
situations or alternatively, check to make sure that the
instrument is not being influence by these
emissions.
CAUTION: Please follow manufacturers test
procedures whenever possible. Do not attempt to
measure unknown voltages or components until a
complete understanding of the circuit is obtained.
4
1992 Emissions Standard
1992 Immunity Standard
1993 Safety Standard
1995 Safety Standard
1995 Safety Standard
B. SAFETY CONSIDERATIONS
WARNING: Use caution when performing
measurements on temperatures above 38ºC.
GENERAL GUIDELINES
ALWAYS
• Test your thermometer before using it to make sure it is
operating properly.
• Inspect temperature probes before using to make sure
there are no breaks or shorts.
• Double check all connections before testing.
NEVER
• Insert the probe into an electrically charged medium.
• Touch the probe tip or shaft after it has been inserted in
a hot substance.
5