Table of Contents
Advertisement
Menu Mode (continued)
Over temperature alarm
1.
To activate menu mode, press and hold down the MENU key until
the 1100T/D beeps and "EDIT" is displayed.
2.
Press the menu key repeatedly until over temperature alarm mode
is displayed (see display below).
3.
Press the RIGHT ARROW key to activate (Lt-yes) or deactivate (Lt-
no) the over temperature alarm.
4.
To increase the alarm point press the LEFT ARROW key until Lt-uP
is displayed. Press the RIGHT ARROW key to increase the displayed
value. Holding the RIGHT ARROW key down increases the display
rapidly.
5.
To decrease the alarm point press the LEFT ARROW key until Lt-dn
is displayed. Press the RIGHT ARROW key to decrease the
displayed value. Holding the RIGHT ARROW key down decreases
the display rapidly. After the desired alarm point is set press the
MENU key to go to the next selection or press and hold the MENU
key to
exit menu mode.
26
Menu Mode (continued)
Over temperature alarm gap
1.
To activate menu mode, press and hold down the MENU key until
the 1100T/D beeps and "EDIT" is displayed.
2.
Press the menu key repeatedly until over temperature alarm mode
gap is displayed (see display below).
3.
Gap mode sets how far away from the alarm set point the
temperature must be before the alarm sounds.
4.
To increase the gap point press the LEFT ARROW key until GAP-uP
is displayed. Press the RIGHT ARROW key to increase the displayed
value. Holding the RIGHT ARROW key down increases the display
rapidly.
5.
To decrease the alarm point press the LEFT ARROW key until GAP-
dn is displayed. Press the RIGHT ARROW key to decrease the
displayed value. Holding the RIGHT ARROW key down decreases
the display rapidly.
6.
After the desired gap is set press the MENU key to go to the next
selection or press and hold the MENU key to exit menu mode.
27
Advertisement
Table of Contents
