Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Digitron 1100T
- Page 1 1100T/D Thermometer Instruction Manual...
-
Page 2: Table Of Contents
A. INTRODUCTION 1. Congratulations!! Congratulations ........3 Thank you for purchasing DIGITRON products. The 1100 Product Description ......3 series thermometers are easy to use and built to last. Declaration of Conformity ..... 4 They are backed by a 2 year limited warranty. -
Page 3: Declaration Of Conformity
B. SAFETY CONSIDERATIONS 3. EC Declaration of Conformity This is to certify that DIGITRON 1100 series WARNING: Use caution when performing thermometers conform to the protection requirements of measurements on temperatures above 38ºC. the council directive 89/336/EEC, in the approximation ... -
Page 4: Technical Data
C. TECHNICAL DATA 2. Product Applications 1. Features and Benefits Perform the following tests and/or measurements with Large LCD Easy to read measurement results the 1100 series thermometers: Validate the temperature of incoming food product High Accuracy Reliable test results. -
Page 5: Specifications
Battery Type AA (LR6) x 2 Battery Life Up to 14,000 hours On / Off Key turns the 1100T/D on for use or off (Standby mode). The clock is displayed when the Countdown Timer Select from 1 second to 24 hours ... -
Page 6: Clock, Timer & Alarm
2. Clock, Timer, & Alarm Countdown timer display When the 1100T/D is off, the real time clock is displayed and the countdown timer and alarm clock functions are available. Press the MENU key to cycle through each of the displays. - Page 7 Clock, Timer, & Alarm (continued) Clock, Timer, & Alarm (continued) Alarm clock display To activate the alarm press the RIGHT ARROW key and an alarm bell will display next to the time. ...
-
Page 8: Performing Measurements
3. Performing Measurements 1. Turn the 1100T/D on by pressing the On/Off key. The display will Increased Update Rate - Pressing the RIGHT ARROW key increases the read update rate allowing quickly changing temperatures to be measured. “F”... - Page 9 Performing Measurements (1100D Only) Performing Measurements (1100D Only) 7. “L” will flash when the 1100D is logging. Pressing the RIGHT 10. Reserved logging is used to tell the 1100D to log at the preset ARROW key will activate and deactivate logging. The number to the start and stop times.
- Page 10 Performing Measurements (1100D Only) Performing Measurements (1100D Only) 13. Press the MENU repeatedly to switch the 1100D to store / 16. Pressing the LEFT ARROW key switches the 1100D to recall mode recall mode (See below) (See below).
- Page 11 20. Pressing the MENU key cycles the sub display to the temperature/ 18. Press the MENU key to cycle the 1100T/D to temperature / timer alarm clock display. See below. display mode. The temperature and one of three preset countdown timers is displayed.
-
Page 12: Menu Mode
To activate menu mode, press and hold down the MENU key until To activate menu mode, press and hold down the MENU key until the 1100T/D beeps and “EDIT” is displayed. Pressing the MENU the 1100T/D beeps and “EDIT” is displayed. - Page 13 The auto power off function conserves battery life by turning the To activate menu mode, press and hold down the MENU key until 1100T/D off after 5 minutes of inactivity. To disable or enable this the 1100T/D beeps and “EDIT” is displayed.
- Page 14 To activate menu mode, press and hold down the MENU key until To activate menu mode, press and hold down the MENU key until the 1100T/D beeps and “EDIT” is displayed. the 1100T/D beeps and “EDIT” is displayed. Press the menu key repeatedly until over temperature alarm mode Press the menu key repeatedly until over temperature alarm mode is displayed (see display below).
- Page 15 ARROW key to select between “K” and “T” type thermocouple input. To return the 1100T/D to auto select press the LEFT ARROW key until Auto is displayed. After the desired probe type is selected press the MENU key to go to the next selection or press and hold the MENU key to exit menu mode.
-
Page 16: Logging Parameters (1100D Only)
Logging Parameters 1100D Only (continued) E. Logging Parameters (1100D Only) To change the logging start time, press and hold the MENU key To change the logging interval, press and hold the MENU key down down to activate menu mode until the 1100D beeps and “EDIT”... - Page 17 Logging Parameters 1100D Only (continued) Logging Parameters 1100D Only (continued) To change the logging stop time, press and hold the MENU key To enable (reserve) the logging function to begin at the specified down to activate menu mode until the 1100D beeps and “EDIT”...
-
Page 18: Retrieving Logged Data (1100D)
Remove old batteries and replace with new batteries. Observe the correct polarity. e. Reassemble the instrument in reverse order from above. 2. Cleaning your 1100T/D: Use a mild detergent and slightly damp cloth to clean the surfaces of the unit. ...