Getting Ready To Operate; Initial Inspection; Manuals And Disks - HP 16500a Setting Up

1
Getting Ready to Operate
Initial
Inspection
Manuals and
Disks
HP 16500A/16501A
Setting Up the System
This chapter provides you with information to prepare your HP
16500N1650lA
for operation. It explains how to inspect the HP
16500N1650lA
and lists the manuals, disks, and standard accessories
included with the instrument.
This
chapter also describes the
recommended operating environment, including ventilation and power
requirements. Finally, you learn how to prepare the HP
16500N1650lA
for operation by removing the shipping disks, selecting
the proper line voltage, checking the fuse, and providing power.
Inspect
the shipping container for damage.
If the shipping container or
packaging material is damaged, you should keep them until the
contents of the shipment have been checked. This should include a
complete mechanical and electrical check of the instrument and a
complete inventory of the items that were shipped with the instrument.
If shipping damage has occurred or if the instrument does not operate
properly, refer to
theHP 16500A11650lA Service Manual.
The complete set of manuals and disks included with the HP
16500N1650lA
is listed below.
If any are missing, contact your nearest
Hewlett -Packard office.
Included with the mainframe are:
• the book
Feeling Comfortable With Logic Analyzers.
• the book
Feeling Comfortable With Digitizing Oscilloscopes.
• this manual,
Setting Up The HP 16500A11650lA.
• theHP 16500A11650lA Reference Manual.
• theHP 16500A11650lA Programming Reference Manual.
• theHP
16500A11650lA Service Manual.
Getting Ready to Operate
1-1