Table of Contents
Advertisement
If the product gets dirty, wash it with
your hands without using a brush, etc.
while holding the au Nano IC Card 04
and microSD memory card trays so
that they do not come off.
• After the product gets wet
After the product gets wet, drain
water and wipe the main unit with a
clean dry cloth.
In cold climates, water on the main
unit may turn to frost.
Using the product with frost may
cause a fault. Do not leave the
product without wiping off water. (No
special measures against
condensation have been implemented
in this product)
• Rubber seals
The rubber seals on the inner edge of
au Nano IC Card 04 tray and microSD
memory card tray are important to
maintain waterproof property. Do not
damage or remove the rubber seals.
When installing the au Nano IC Card
04 tray or microSD memory card tray,
take care not to get the rubber seals
caught. Forcibly closing the tray with
the rubber seals caught may damage
them resulting in loss of waterproof
property. Just a small particle (a hair,
etc.) between contact surfaces can
cause water to enter inside.
54
Advertisement
Table of Contents
