Table of Contents
Advertisement
●
When suddenly brought into a warm place
from a cold place, or when in a humid
location, or when used where temperature
suddenly changes (e.g. near the air
discharge port of an air conditioner), water
droplets (i.e. condensation) sometimes are
formed inside the product. Note that when
used under conditions such as this,
humidity might cause corrosion or a fault.
●
When wiping the display, wipe with a soft,
dry cloth. Use of a moistened cloth, glass
cleaner or other similar liquid might cause a
fault.
●
When connecting/disconnecting an
external device to/from the connector, be
sure the connector of the external device is
straight in relation to the connector.
●
Note that applying excessive force when an
external device is connected to the
connector may damage the product.
●
Note that inserting a metal earphone jack
or accessory into the stereo earphone jack
may damage the product.
●
Do not exert excessive force when
installing/removing a microSD memory
card. Doing so might injure your hands or
fingers.
●
While writing/reading data to/from a
microSD memory card, do not subject the
product to vibration or impact, or turn off
the power. Doing so might cause loss of
data or a fault.
●
Do not lose the microSD memory card tray
after it has been removed.
38
Advertisement
Table of Contents
