Audiovox VOD1022 Operation Manual page 8

Audiovox dvd player with drop-down video tv/monitor operation manual

Hide thumbs Also See for VOD1022:

Table of Contents

Remote Control Function Descriptions

Function control is available on the unit and the remote control

1. POWER Button*

Press this button to turn the VOD1022 on. Press the button again to turn the VOD1022 off.

2. SOURCE Button*

Video signals from video equipment connected to the audio / video inputs can be displayed on the monitor by

pressing this button. Each time the button is pressed, the audio / video source will change sources in the

following order: DVD, AV1, AV2 and AUX.

3. AUTO MEMORY Button (AUTO PROGRAM Button)*

When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with

signals of sufficent levels are automatically stored.

4. SKIP/SEARCH Button

This button selects betweeen SKIP and SEARCH mode. In "SKIP mode" the TV tuner will tune and stop on

channels that are programmed into memory when the CHANNEL UP/DOWN buttons are used. When in the

SEARCH mode, the TV will stop on all active channels.

5. ERASE/WRITE Button

While tuned to a channel, pressing this button will either store or erase the channel from memory. The stored

channel numbers are displayed in "GREEN" on the LCD display screen, and the erased channel numbers are

displayed in "RED".

128-7094

8 of 31

Table of Contents