Setting The Flash Time; Changing The Pin Code - AUDIOLINE DECT8049 Operating Instructions Manual

Cordless digital dect telephone
Table of Contents

Advertisement

Available languages

Available languages

8.9

Setting the FLASH time

1.
Press the Menu display button.
2.
Select Set Base with
3.
Select Recall with
4.
Select Recall 1 (100ms) or Recall 2 (300ms) with
5.
Now select further menu functions or exit the menu by pressing the
8.10

Changing the PIN code

Some functions of the telephone system are protected against unauthorised use by a PIN
code. The PIN code consists of four numbers. As supplied, the PIN code is set to "0000". To
change the PIN code, proceed as follows:
1.
Press the Menu display button.
2.
Select Set Base with
3.
Select System-PIN with
4.
Now enter the current four-digit PIN code using the number pad (factory setting 0 0 0 0)
and confirm with OK.
5.
Now enter the new four-digit PIN code using the number pad and confirm with OK.
6.
Now enter the new four-digit PIN code once more for confirmation and confirm with OK.
7.
Now select further menu functions or exit the menu by pressing the
If the old PIN code is not entered correctly, the process will be aborted.
- Special functions -
and
and confirm with OK.
and
and confirm with OK.
and
and confirm with OK.
and
and confirm with OK.
and
and confirm with OK.
button.
button.
61

Advertisement

Chapters

Table of Contents
loading

Table of Contents