High Mounted Stop Lamp Replacement; License Plate Light Bulb Replacement - Kia Sedona Owner's Manual

High mounted stop lamp
replacement
1. Open the tailgate.
2. Gently remove the center cover of
the rear tailgate trim.
3. Disconnect the electrical connec-
tor.
4. Loosen the retaining nuts and
remove the spoiler.
5. Remove the high mounted stop
light assembly after loosening the
screws.
6. Reinstall a new light assembly in
OYP074027K
the reverse order of removal.
OYP074070N
OYP074071N
Maintenance
License plate light bulb
replacement
1. Loosen the lens retaining screws
with a phillips head screwdriver.
2. Remove the lens.
3. Remove the bulb by pulling it
straight out.
4. Install a new bulb.
5. Reinstall the lens securely with the
lens retaining screws.
OXM073118
7 83