Kia Sedona Owner's Manual page 236

Features of your vehicle
To flash the headlights, pull the lever
towards you. It will return to the nor-
mal (low beam) position when
released. The headlight switch does
not need to be on to use this flashing
feature.
4 134
High Beam Assist (if equipped)
OYP047358
The High Beam Assist is a system
that automatically adjusts the head-
lamp range (switches between high
beam and low beam) according to
the brightness of other vehicles and
road conditions.
Operating condition
1. Place the light switch in the AUTO
position.
2. Turn on the high beam by pushing
the lever away from you.
The High Beam Assist (
cator will illuminate.
3. The High Beam Assist will turn on
when vehicle speed is above
45km/h (24.8mph).
• If the lever is pushed away when
the High Beam Assist is operat-
OYP047362
ing, the High Beam Assist will
turn off and the high beam will
be on continuously. The High
Beam Assist (
turn off.
• If the lever is pulled towards you
when the High Beam Assist is
operating, the High Beam Assist
will turn off.
4. If the light switch is placed to the
headlamp position, the High
Beam Assist will turn off and the
low beam will be on continuously.
) indi-
) indicator will