Other Material - Yanmar 3JH4E Service Manual

4. Disassembly and reassembly

4.2.4 Other material

Items
Liquid gasket Three Bond
No.1
TB1101
Three Bond
No.2
TB1102
Three Bond
No.3
TB1103
Three Bond
No.4
TB1104
Three Bond
No.10
TB1211
Three Bond
TB1212
Adhesive Three Bond
TB1401
Lock tight
SUPER
TB1324
Seal Tape
O-ring kit
EP lubricant Brand name
(molybdenum (LOWCOL
disulfate) PASTE)
Brand name
(PASTE
SPRAY)
Brand name
(MOLYPASTE)
Usual contents
200 g Non-drying liquid gasket; solvent less type, easy to
(1 kg also remove, superior in seawater resistance, applicable
available) to various mating surfaces.
200 g Non-drying liquid gasket; easy to apply, superior in
(1 kg also water resistance and oil resistance, especially
available) superior in gasoline resistance.
150 g Drying film, low viscosity and forming of thin film,
appropriate for mating surface of precision parts.
200 g Semi-drying viscoelastic material, applicable to non-
(1 kg also flat surface having many indentations and
available) protrusions, superior in heat resistance, water
resistance, and oil resistance.
100 g Solvent-less type silicone-base sealant, applicable to
high temperature areas. (-50 °C to 250)
100 g Silicone-base, non-fluid type, thick application
possible.
200 g Prevention of loose bolts, gas leakage, and
corrosion. Torque required to loosen bolt: 10 to 20%
larger than tightening torque.
50 g Excellent adhesive strength locks bolt semi-
permanently.
5 m round tape Sealing material for threaded parts of various pipes.
Ambient temperature range: -150 °C to 200 °C
Ø1.9 x 2 m: 1 O-ring of any size can be prepared, whenever
Ø2.4 x 2 m: 1 required.
Ø3.1 x 2 m: 1 (Including adhesive, release agent, cutter, and jig)
Ø3.5 x 2 m: 1
Ø5.7 x 2 m: 1
50 g For assembly of engine cylinders, pistons, metals
shafts, etc.
Spray type facilitates application work.
330 g
50 g Prevention of seizure of threaded parts at high
temperature.
Applicable to intake and exhaust valves. (stem,
guide, face)
136
Features and application