Advertisement
OPTIONAL:
Wireless IR headphones (Part Number IRHSCS)
D. Powering and installation
1. Powering the system indoors (Refer to Figure 1)
Plug one end of the AC to DC adapter into the DC 9V jack on the
right side of the main unit, then plug the other end into the 120V AC
power receptacle.
2. Powering the system in a car
Plug one end of the DC Power adapter into the DC 9V jack on
the unit, then plug the other end into the cigarette lighter socket.
3. Powering the system with rechargeable Battery
Please refer to K. * Rechargeable Battery Installation and Use
(Page 34 and 36).
E. Installation Prior to installation
Make sure that the unit is placed into the mounting bag with the clear
plastic covering around DVD door, Load a disc into the DVD
compartment and then fasten the Velcro strap across the top portion
of the unit. If you are installing the bag onto the seatback you will need
to attach the supplied Seat Standoff to the back of the mounting bag
with the Velcro bands to obtain the proper viewing angle as shown in
Figure.2
Figure 1
5
Advertisement
