Table of Contents
Advertisement
SNOOZE / TURNING THE ALARM OFF
When activated, the alarm icon flashes, the backlight and
projector turn on for 8 seconds and the alarm sounds for 2
minutes if no key is pressed.
To silence the alarm:
• Press SNOOZE / LIGHT to silence it for 8 minutes. The
alarm 1 or alarm 2 icon will flash to show snooze is
enabled.
OR
• Press any key except SNOOZE / LIGHT to mute the alarm
and activate it again in 24 hours.
SLEEP TIMER / SOOTHING SOUND
You can choose 1 of 6 soothing sounds to play for a set
time while you fall asleep:
• Bird
• Wind
• River
• Raindrop
• Waterfall
• Ocean Wave
To turn the sleep timer ON:
1. Press Sound /
on / off once, this will automatically
activate the last setting you used.
8
RM998Pmanual-E
If you want to change the time, sound or volume, continue
as follows:
2. Press
or
to change the soothing sound volume.
3. Press Sound /
on / off to confirm.
4. Press and hold Sound /
on / off for 2 seconds to
enter setting mode.
5. Press
or
to change the soothing sound.
6. Press Sound /
on / off to confirm.
7. Press
or
to set the sleep timer to turn off after 120
90
60
30
15
or 0 minutes. When 0 minutes is
selected the soothing sound will automatically turn off
after a few seconds.
8. Press Sound /
on / off to confirm the setting. SOUND
will flash on the LCD display to indicate that the sleep
timer is activated.
TALKING CLOCK
The talking clock can learn to turn the projector on, the
alarm(s) on or off, and tell you the time, temperature and
alarm status by listening to simple commands given by you.
It can recognize commands from up to 2 users. The talking
clock voice prompts take you through how to train and use
this feature.
8
04/12/7, 2:51 PM
Advertisement
Table of Contents
