Installing/Adjusting The Anti-Tippers - Invacare spyder Service Manual

PROCEDURE 7
A
S
D
T J
A U
B S
I T
L
M
I E
T N
Y T
S
FIGURE 2 - INSTALLING/ADJUSTING ANTI-TIPPER MOUNTING BRACKETS
INSTALLING/ADJUSTING THE
ANTI-TIPPERS (FIGURE 3)
19-INCH SEAT-TO-FLOOR HEIGHT WITH 26-
INCH REAR WHEELS AND 6-INCH CASTERS
ONLY - If wheelchair is equipped with
anti-tippers, DO NOT mount axle mount-
ing plate in the most forward (least stable)
position. Anti-tippers will not provide pro-
tection in this position.
Anti-tipper Mounting Bracket
ANTI-TIPPER MOUNTING
BRACKET POSITIONS
Anti-tipper
Mounting
Bracket
DETAIL "B" - CENTER
ANTI-TIPPER MOUNTING
BRACKET POSITIONS
Anti-tipper
Mounting
Bracket
WARNING
Frame
Axle Mounting Plate
Bolts
DETAIL "A" - FRONT
Axle Mounting
Plate
Axle Mounting
Plate
Anti-tippers MUST be fully engaged and re-
lease buttons fully protruding out of release
button holes BEFORE using wheelchair.
DO NOT operate the wheelchair if the anti-
tippers CANNOT be positioned so that they
extend BEYOND the outer edge of the rear
wheels AND if a 1-1/2 to 2-inch clearance
CANNOT be acheived - otherwise injury
or damage may occur.
32
STABILITY ADJUSTMENTS
WARNING