Invacare spyder Service Manual page 29

STABILITY ADJUSTMENTS
NOTE: The seat to floor heights are based on pneumatic tires and pneumatic tires with flat free inserts. If wheelchair is
equipped with urethane tires, subtract 1/2-inch from the measurements listed below. All heights are approximate to +1/
4-inch due to tire wear and air pressure.
19-INCH SEAT-TO-FLOOR HEIGHT
22-INCH REAR WHEELS, 5-INCH CASTERS
LONG FORK STEM
Spacer
22-INCH REAR WHEELS, 6-INCH CASTERS
LONG FORK STEM
Spacer
Composite/
Urethane
Casters
ONLY
24-INCH, 559 OR 3SCF REAR WHEELS, 5-INCH CASTERS
LONG FORK STEM
Spacer
24-INCH, 559 OR 3SCF REAR WHEELS, 6-INCH CASTERS
LONG FORK STEM
Spacer
Composite/
Urethane
Casters
ONLY
26-INCH REAR WHEELS, 5-INCH CASTERS
LONG FORK STEM
Spacer
AXLE LUG POSITION
AXLE LUG POSITION
AXLE LUG POSITION
AXLE LUG POSITION
AXLE LUG POSITION
29
LONG ANTI-TIPPER
LONG ANTI-TIPPER
LONG ANTI-TIPPER
LONG ANTI-TIPPER
LONG ANTI-TIPPER
PROCEDURE 7
ANTI-TIPPER MOUNTING
BRACKET POSITION
Center
ANTI-TIPPER MOUNTING
BRACKET POSITION
Center
ANTI-TIPPER MOUNTING
BRACKET POSITION
Center
ANTI-TIPPER MOUNTING
BRACKET POSITION
Center
ANTI-TIPPER MOUNTING
BRACKET POSITION
Center
A
S D
T J
A U
B S
I T
L M
I E
T N
Y T
S