Behringer T1952 User Manual page 9

THRESHOLD
6
RATIO
7
ATTACK
8
RELEASE
9
+
Too long RELEASE time can lead to the fact that the compressor permanently attenuates the
signal, without the signal being compressed. Remember when setting effective release times:
As short as possible, as long as necessary.
10
OUTPUT
11
+
Please note when using the THRESHOLD control of the peak limiter section, that the OUTPUT
control of the compressor section precedes the peak limiter section. If the OUTPUT control is
set too high, this can result in continuous peak limiting (see
12
SC MON
13
+
Please note that when the SC MON switch is engaged, the audio processing facility of the
respective channel is disabled.
IN/OUT
14
INTERACTIVE
15
SC FILTER
16
AUTO
SC EXT
“THRESHOLD control”).