Sound Menu - Yamaha RX-V1900 Owner's Manual

Muting type MUTING TYPE
Use this feature to adjust how much the mute function
reduces the output volume (page 37).
Choice
FULL Mutes all the audio output.
–20dB Reduces the current volume by 20 dB.
Maximum volume MAX VOL.
Use this feature to set the maximum volume level in the
main zone. This feature is useful to avoid the unexpected
loud sound by mistake. For example, the original volume
range is –80.0 dB to +16.5 dB. However, when "MAX
VOL." is set to –5.0 dB, the volume range becomes
–80.0 dB to –5.0 dB.
Control range: –30.0 dB to +15.0 dB, +16.5 dB
Control step: 5.0 dB
Notes
• When this unit is in the automatic setup procedure, the volume
level is automatically set to 0 dB regardless of the current
"MAX VOL." setting.
• The "MAX VOL." setting takes priority over the "INIT. VOL."
setting.
Initial volume INIT. VOL.
Use this feature to set the volume level of the main zone
when the power of this unit is turned on.
Choices: OFF, MUTE, –80.0 dB to +16.5 dB
Control step: 0.5 dB
Note
The "MAX VOL." setting takes priority over the "INIT. VOL."
setting.
Functions
Customizing this unit (MANUAL SETUP)

3 SOUND MENU

Use this feature to adjust the audio parameters.
■ Equalizer
A)EQUALIZER
Use this feature to select the parametric equalizer or the
graphic equalizer.
Equalizer type select EQ TYPE
Use this feature to select the type of equalizer.
Choice
Uses the parametric equalizer adjusted in the
AUTO PEQ
automatic setup procedure.
GEQ
Uses the equalizer settings adjusted in "GEQ
EDIT".
OFF Deactivates the equalizing feature.
Note
"AUTO PEQ" is available only after you have done the
automatic setup procedure (page 30).
Graphic equalizer edit GEQ EDIT
Use this feature to adjust the tonal quality of each channel.
Speaker channel: FRONT L, FRONT R, CENTER,
SUR. L, SUR. R, SB L, SB R, PRNS L,
PRNS R, SWFR
Frequency band: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz,
6.3 kHz, 16 kHz
Control range: –6.0 dB to +6.0 dB
Control step: 0.5 dB
y
To output a test tone while adjusting the tonal quality, set
"TEST" to "ON".
Notes
• "GEQ EDIT" is available only when "EQ TYPE" is set to
"GEQ".
• The available speaker channels differ depending on the
"CONFIG" setting.
• Instead of "SB L" and "SB R", "SB" is displayed if "SUR.B L/
R SP" is set to either "SMLx1" or "LRGx1".
Functions
71
En