Using The Sleep Timer - Yamaha RX-V1900 Owner's Manual

Playback
Before performing the following operations, set the operation
mode selector on the remote control to E AMP.

Using the sleep timer

Use this feature to automatically set the main zone to the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source. The sleep timer also
automatically turns off any external components
connected to the AC OUTLET(S) (page 25).
Press BSLEEP on the remote control repeatedly
to set the amount of time.
The sleep timer setting changes as shown below.
120min.
OFF
Once the sleep timer is set, the SLEEP indicator lights up
in the front panel display, and the display returns to the
selected sound field program.
To cancel the sleep timer
Press BSLEEP on the remote control repeatedly to select
"SLEEP OFF".
y
If you set the main zone to the standby mode, the sleep timer is
automatically canceled.
38
En
90min.
30min. 60min.