Headlamp Beam Height Adjustment - PEUGEOT 3008 Handbook

Headlamp beam height adjustment

Manual adjustment of
halogen headlamps
To avoid causing a nuisance to other road
users, the beams of the halogen headlamps
should be adjusted according to the load in the
vehicle.
0 Driver or driver + front passenger.
- Driver + front passenger + rear
passengers.
1 5 people.
- 5 people + a load in the boot.
2 Driver + a load in the boot.
The initial setting is position "0".
Automatic adjustment of
"Full LED" technology
headlamps
This system automatically adjusts the height
of the beams from this type of headlamp,
according to the load in the vehicle, to avoid
causing a nuisance to other road users.
If a fault occurs, this warning lamp
comes on in the instrument panel,
accompanied by a message and an
audible signal.
The system then places the headlamp beams
in the lowest position.
Lighting and visibility
Do not touch the "Full LED" technology
headlamps. Risk of electrocution!
Have the system checked by a
PEUGEOT dealer or a qualified
workshop.
4
145