PEUGEOT 3008 Handbook page 331

Reversing lamp
(tailgate)
F Open the tailgate, then introduce a flat
screwdriver into the cut-out to unclip the
access cover on the side in question.
F Slacken the lamp fixing nut using a 10 mm
box spanner or socket.
F Manually unscrew and remove the lamp
fixing nut.
F Disengage the retaining clip, while pushing
the lamp out slightly.
F From the outside, carefully remove the
lamp by pulling it to the rear.
F Disconnect the lamp connector by pressing
on each side.
F Turn the bulb holder a quarter turn and pull
it out.
F Pull the bulb out and replace it.
For reassembly, carry out these operations in
reverse order.
In the event of a breakdown
Changing foglamp bulbs
These bulbs are replaced from outside the rear
bumper:
F pass your hand under the bumper,
F turn the bulb holder a quarter turn and
remove it,
F turn the bulb a quarter turn, pull it out and
fit a new bulb.
For reassembly, carry out these operations in
reverse order.
Take care not to touch the silencer;
there is a risk of burns if changing a
bulb within a few minutes of switching
off the ignition.
8
329