PEUGEOT 3008 Handbook page 208

Driving
Special cases
In some situations, you may need to operate
the parking brake manually.
Immobilisation of the vehicle
with the engine running
To immobilise the vehicle with the engine
running, briefly pull the control lever.
Application of of the parking
brake is confirmed by illumination
of the brake indicator lamp and
the P indicator lamp in the control
lever, accompanied by the display of
the message "Parking brake applied".
206
Parking the vehicle with the
brake released
In very cold conditions (ice), it is
recommended that the parking brake
not be applied.
To immobilise your vehicle, engage a
gear or fit the chocks supplied against
one of the wheels.
Immobilisation of the vehicle with the
parking brake released
F Switch off the engine.
Illumination of the warning lamps in the
instrument panel and control lever confirm
application of the parking brake.
F Switch on the ignition again, without
starting the engine.
F Release the parking brake manually by
pushing the control lever while keeping
your foot on the brake.
The complete release of the parking
brake is confirmed by the brake
indicator lamp and the P indicator
lamp in the control lever going off,
accompanied by the display of the
message "Parking brake released".
F Switch off the ignition.
With an automatic gearbox, P mode is
automatically selected when the ignition
is switched off. The wheels are blocked.