Table of Contents
Advertisement
Whisk attachment
Whisk
adapter
Whisk
Storage/Fixing the wall bracket
Wall
bracket
■ Fix the wall bracket on the firm wall properly. If it is fix on fragile surface such as sheet-
rocks, it may be loose up easily and cause the blender to fall or damage to the wall.
1 Drill two holes (depth of plastic tube's length) in
the wall. (Refer to illustration for dimension.)
2 Hammer two plastic tubes into the holes.
3 Secure the wall bracket on the wall with two
screws.
To attach
1 Insert the whisk into the whisk adapter.
(You hear the "click" sound.)
2 Align the and on the motor housing
and whisk attachment.
3 Turn the whisk attachment to align the
and to lock.
(You hear the "click" sound.)
● Reverse the steps to detach the whisk
attachment.
(Place the
chopper blade
and disk shaft
sideways.)
Disk blade
Attached
the whisk
and whisk
adapter on
the chopper
lid.
(Align
triangle and
rectangle
marks)
51 mm
6 mm
EN11
Advertisement
Table of Contents
