Nom/Nyce Statement; Iram Statement; Internal Bluetooth Notice - Xplore FWS-SC1 Important Product Information

• WCDMA/HSDPA AS/ACIF S042.1 – Requirements for
connection to an air interface of a Telecommunications
Network Part 1. General.
• WCDMA/HSDPA AS/ACIF S042.3 – Requirements for
connection to an air interface of a Telecommunications
Network Part 3. GSM.
Radio Frequency Wireless Communication
Devices
Embedded in the Tablet PC are various Radio Frequency
(RF) wireless communication devices.
The Tablet PC may contain one or more radio-type devices
that operate in the following bands:
• 832–862 MHz band
• 880–915 MHz band
• 1710–1785 MHz band
• 1920–1980 MHz band
• 2500–2570 MHz
• 2400–2496 MHz band
• 5150–5850 MHz band

NOM/NYCE statement

MR
NYCE
All Motion by Xplore Tablet PC and Motion
by Xplore Tablet PC systems meet the safety and technical
standards set by the Normalizacion Y Certificacion
Electronica A. C. (NYCE) / Comision Federal de
Telecomunicaciones (COFETEL) regulating bodies and can
be safely operated.The Tablet PC meets the following
technical standards:
• NOM-001-SCFI-1993
• NOM-019-SCFI-1998
• NOM-EM-151-SCTI
Internal Bluetooth Module Notice Class B
Statement
Class B Equipment: This equipment has been tested and
found to comply with the limits for a Class B digital device,
pursuant to the NOM/COFETEL rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a
residential environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturer's
instruction manual, may cause interference with radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, you are encouraged to try to
correct the interference with one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television
technician for help.
This device complies with all the essential NOM/COFETEL
rules for Information Technology Equipment. Operation is
subject to the following two conditions:
• This device may not cause harmful interference.
FWS-002 Safety and Regulatory Guide
• This device must accept any interference received,
including interference that may cause undesired
operation.
Radio Frequency Wireless Communication
Devices
Embedded in the Tablet PC are various Radio Frequency
(RF) wireless communication devices.
The Tablet PC may contain one or more radio-type devices
that operate in the following bands:
• 832–862 MHz band
• 880–915 MHz band
• 1710–1785 MHz band
• 1920–1980 MHz band
• 2500–2570 MHz
• 2400–2496 MHz band
• 5150–5850 MHz band
All radio-type devices embedded in the Tablet PC have met
all the qualifications for use under COFETEL regulations
and guidelines.

IRAM statement

s
All Motion by Xplore Tablet PC and Tablet PC
systems meet the safety and technical standards set by the
Instituto Argentino de Normalizacion y Certificacion (IRAM)
and the Comision Nacional De Comunicaciones (CNC)
regulating body and can be safely operated and connected
to the wireless network.
The Tablet PC meets the following technical standards:
• Resolution 92/98
• Resolution 197/2004
• Resolution 799/99
• CNT-Q2-60.11
• CNC-Q260.14 V03

Internal Bluetooth notice

Class B Equipment: This equipment has been tested and
found to comply with the limits for a Class B digital device,
pursuant to the IRAM/CNC rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
residential environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturer's
instruction manual, may cause interference with radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, you are encouraged to try to
correct the interference with one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television
technician for help.
This device complies with all the essential IRAM / CNC rules
for Information Technology Equipment. Operation is
subject to the following two conditions:
11