Troubleshooting - D-Link DES-1008PA Quick Installation Manual

TROUBLEShOOTING

setUP and conFigUration ProBlems
1. WhAT ShOULD I DO IF ThE POWER LED DOES NOT LIGhT UP?
- Check if the power adapter is connected properly to the wall socket and the back of the device.
2. WhAT ShOULD I DO IF A CONNECTED DEvICE IS NOT DETECTED?
- Ensure the Link/Act LED for the port the device is connected to is illuminated or flashing. If not,
try using a new LAN cable.
3. WhAT ShOULD I DO IF A POE DEvICE IS NOT BEING POWERED By ThE DES-1008PA?
- Ensure that the PoE device is connected to one of the four PoE enabled ports (1 to 4) and the
connected PoE devices do not exceed the maximum power budget of 58 W.
des-1008Pa
5