The DES-1008E uses auto-sensing 10/100 Mbps ports, allowing a small workgroup to flexibly connect to Ethernet and Fast Ethernet devices to create an
integrated network. These ports detect the network speed and auto-negotiate between 10BASE-T and 100BASE-TX, as well as between full and half-duplex,
allowing you to get the maximum speed possible for each device connected to your network.
AUTO MDI/MDIX CROSSOVER
All ports support automatic MDI/MDIX crossover, eliminating the need for crossover cables or uplink ports. Each port can be plugged directly to a server, hub,
router, or switch using regular straight-through twisted-pair Ethernet cables.
FLOW CONTROL FOR SECURE TRANSMISSION
802.3x flow control on each port minimizes dropped packets when the port's receiving buffer is full. This gives you a more reliable connection for all of your
8-ports 10/100 mbps unmanaged fast with 8 poe ports (41 pages)
Summary of Contents for D-Link DES-1008E
Page 1
AUTO-SENSING 10/100 PORTS The DES-1008E uses auto-sensing 10/100 Mbps ports, allowing a small workgroup to flexibly connect to Ethernet and Fast Ethernet devices to create an integrated network. These ports detect the network speed and auto-negotiate between 10BASE-T and 100BASE-TX, as well as between full and half-duplex, allowing you to get the maximum speed possible for each device connected to your network.
Need help?
Do you have a question about the DES-1008E and is the answer not in the manual?
Questions and answers