Setting A Simulated Location; Saving Locations - Garmin HDD2000 Owner's Manual

Setting a Simulated Location

If you are indoors or not receiving satellite
signals, you can use the GPS simulator to set a
simulated location.
1
Select Settings > Navigation.
2
Select GPS Simulator.
3
From the main menu, select View Map.
4
Select an area on the map.
The address of the location appears at the
bottom of the screen.
5
Select the location description.
6
Select Set Location.

Saving Locations

You can save locations so you can quickly find
them and create routes to them.
Saving a Location
1
Search for a location
GVN60 Owner's Manual
(page 15).
2
From the search results, select a location.
3
Select .
4
Select > Save.
5
If necessary, enter a name, and select Done.
Saving Your Current Location
1
From the map, select the vehicle icon.
2
Select Save.
3
Enter a name, and select Done.
4
Select OK.
Starting a Route to a Saved Location
1
Select Where To? > Saved.
2
If necessary, select a category, or select All
Saved Places.
3
Select a location.
4
Select Go!�
21