Adjust System Settings; Set Pin Code; Set Bluetooth Connection; Select Blackout Setting - Philips CEM250 User Manual

8 Adjust system
settings

Set PIN code

You can set a password for bluetooth
connection.
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly to until [PIN
CODE] is displayed.
3
Press to confi rm selection.
4
Turn and then press
5
Repeat step 4 to enter other three digits.

Set bluetooth connection

You can set whether the set connects to last
bluetooth device automatically.
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly to until [AUTO
ON] or [AUTO OFF] is displayed.
• [AUTO ON]: The unit connects to
last bluetooth device automatically.
• [AUTO OFF]: does not connect
automatically
3
Press to confi rm selection.

Select blackout setting

You can set the screen to turn off automatically
after the unit is idle for 10 or 20 seconds.
1
Press MENU/DISP for 3 seconds.
2
Turn to select a setting:
• [BKO 10 S] : Turn off the screen
automatically 10 seconds after last
operation.
26 EN
3

Turn demo mode on/off

When demo mode is on, when the unit is
idle for more than 2 minutes, all functions are
displayed.
1
2
to enter a digit.
3
4
Change button backlight
color
You can change button backlight color from
blue to red or vice versa.
1
2
3
• [BKO 20 S] : Turn off the screen
automatically 20 seconds after last
operation.
• [BKO OFF] : Never turn off the
screen.
Press to confi rm.
Press MENU/DISP for 3 seconds.
Press or repeatedly to until [DEMO]
is displayed.
»
The screen shows current Demo
mode setting.
Turn to select a setting:
• [DEMO ON] : Turn on the demo
mode.
• [DEMO OFF] : Turn off the demo
mode.
Press to confi rm.
Press MENU/DISP for 3 seconds.
Press or repeatedly to until [KEY
BLUE] or [KEY RED] is displayed.
Turn to select a setting:
• [KEY BLUE]: Backlight turns blue.
• [KEY RED]: Backlight turns red.