RCA PRO808A User Manual page 43

Poor auto focus operation
Picture is too dark or
subject too dark.
Viewfinder displays are
out of focus
Date and/time (or date)
were recorded on tape
Date and/or time are
incorrect
Remote control
will not operate
camcorder
Scene is dark. Auto-focus may not work under this condition. See page 28
l
for details
on manual focus.
Lens is smudged, and image appears unfocused.
l
Viewfinder eyepiece focus is misadjusted. See page 23.
l
Select the best preset program mode for the recording situation.
l
See page 30.
Try adjusting eyepiece focus control. See pqe 23.
l
Pull electronic viewfinder out to the extended operating position.
l
Date and time (or date) will be recorded on tape whenever they appear in
l
the viewfinder.
Press DATE/TIME button to remove them from viewfinder when recording.
l
Clock cell may need replacing. See page 26.
l
Date and/or time may need to be set. See
l
Aim remote control at remote control sensor on camcorder.
l
Remote control battery may need replacing.
l
If POWER switch is in CAM position, the ON/POWER SAVE lever must be
l
in ON position for camcorder to operate.
POWER switch must be in CAM or PLAY position for camcorder to
l
operate.
Camcorder's remote control sensor is exposed to direct sunlight or strong
l
artificial light. This may interfere with operation of camcorder by remote
control.
page 26.
41