RCA PRO808A User Manual page 37

Installation
0
audio/video cable to the AUDIO IN jack on the
TV or VCR and the other white plug to the
white audio jack located under the door on the
side of the camcorder.
If your TV or VCR has stereo AUDIO
Note:
attach the AUDIO
plug to the one labeled MONO. If
is not labeled MONO, you may need a Y-adapter
one
hear sound from both channels.
to
Playback Operation and How to Copy Tapes on the VCR
1. A. Camcorder connected directly to TV monitor:
Turn on the TV and tune it to the video input
channel.
B. Camcorder connected to VCR that is already
connected to TV: Turn on VCR and place it in
the "line" or "camera mode". (If your VCR
does not have a "line" or "camera mode",
consult the VCR owner's manual.) Operate the
TV as you normally do to see the signal
coming from the VCR.
2. Attach a power supply, and press and hold the
small button on the camcorder's POWER switch
while you place it in PLAY.
3. Insert the cassette you want to play back.
Viewing What the Camcorder is Seeing (or Recording)
1. A. Camcorder connected directly to TV: Turn on
the TV, and tune it to the video input channel.
B. Camcorder connected to VCR that is already
connected to TV: Turn on VCR and place it in
the "line" or "camera mode". (If your VCR
does not have a "line" or "camera mode",
consult the VCR owner's manual.) Operate the
TV as you normally do to see the signal
coming from the VCR.
2. Attach a power supply and press and hold the
small button on the camcorder's POWER switch
0
2 Attach the yellow video plug on one end of the
included audio/video cable to the VIDEO IN jack
on the TV or VCR and the other yellow plug to
the yellow video jack located under the door on
the side of the camcorder.
jacks,
4. Press PLAY to begin playback
-During playback, use the playback
features described 011 pugc~ 33.
place a blank cassette in the VCR, and
press the VCR's RECORD button.
Caution:
recording of television programs and
other recorded material may infringe
the rights of others.
6. Press STOP when you are finished.
while you place it in CAM. Place ON/POWER
SAVE in ON, and insert the cassette you want to
record on.
Note:
When the camcorder is used as a camera, turn the
TV's volume down to prevent a high-pitched squeal
caused by feedback.
3. Press the camcorder's thumb trigger
(START/STOP
You can watch what the camcorder is seeing (or
recording) on the TV screen.
The unauthorized
begin recording.
on remote) to