RCA PRO808A User Manual page 27

0
4 LP Indicator
LP appears when you play back a tape
recorded in LP speed.
The dew indicator appears when excessive
l
moisture is in the camcorder or cassette. The
camcorder's buttons will not operate except
to eject the cassette. Press EJECT and
remove the cassette from the camcorder.
Place the camcorder in a warm, dry area until
the B indicator disappears (approximately
one hour). When it disappears, the
camcorder will operate.
TAPE appears when approximately five
l
minutes of recording time is left on the tape.
TAPE END appears when the end of the tape
l
is reached during recording.
0
Time Remaining Display
The time counter appears here during
recording or playback.
Press COUNTER RESET to reset the counter
l
to "0:OO:OO" when you start recording or
playing back a tape.
POWER set to PLAY:
Press COUNTER MEM (memory) to turn the
l
time counter's memory stop feature on or off.
An M appears in front of the time counter
when memory stop is on.
POWER set to CAM (Camera):
*During recording, press COUNTER MEM
(memory) to change the time counter display
to the tape time remaining display. After a
few seconds, the display returns to the time
counter.
These displays are not recorded when they
l
appear.
0
7 Manual Focus Indicators
Press FOCUS ON/OFF to turn off auto focus
l
and focus manually. AUTO LOCK must be
out of AUTO LOCK. The MF indicator will
appear in the viewfinder during manual focus.
l
MF+ or MF- will appear when using
MANUAL FOCUS + or -.
*This display is not recorded when it appears.
auto focus. No indicator appears when using
auto focus.
l
camcorder or if you try to record on a cassette
that has its safety tab closed.
l
cassette.
0
POWER set to CAM (Camera):
Press DATE/TIME to display or remove the
l
time and date (or date) from the viewfinder
after they are set.
. This display will be recorded on the tape
whenever it appears.
l
been set or when the clock battery is not
installed correctly or needs replacing.
Details are page 26.
o n
l