Show Dab+ Information - Philips AJB4300 User Manual

2
Press + TUNING/ HR - to scroll through
the menu options:
• [Full scan] (full scan): scan and store all
the available DAB+ radio stations.
[Manual tune] (manual tune): tune to
•
a specific channel/frequency manually
and add it to the station list.
• [DRC] (Dynamic Range Compression):
compress the dynamic range of a radio
signal.
[Prune] (Prune): remove all the invalid
•
stations from the station list.
• [System] (System): adjust system
settings (see the Chapter "Use system
menu").
3
To select an option, press SELECT.
4
Repeat steps 2 to 3 if any sub-option is
available under one option.
[DRC]
• [DRC off] (DRC off): switch DRC off.
[DRC high] (DRC high): switch DRC
•
on to the high level (the default option
recommended for noisy environment).
• [DRC low] (DRC low): switch
DRC on to the low level (the
option recommended for less noisy
environment).
[Prune]
• [No] (no): return to the previous
menu.
[Yes] (yes): remove all the invalid
•
stations from the station list.
Note
•
If no button is pressed within 10 seconds, the menu
exits.
EN
8

Show DAB+ information

While listening to DAB+ radio, press INFO
repeatedly to scroll through the following
information (if available):
» Station name
» Dynamic Label Segment (DLS)
» Program type (PTY)
» Ensemble Name
» Frequency
» Signal error rate
» Bit rate and audio status
» Codec