Listen To An External Device; Charge Your Device; Adjust Volume; Adjust Display Brightness - Philips AJB4300 User Manual

Listen to an external device

With this product, you can also listen to an
external audio device such as an MP3 player.
1
Connect an audio input cable (not
supplied) with a 3.5 mm connector on
both ends to
the AUDIO IN socket on this radio,
•
and
• the headphone socket on the external
device.
2
Press SOURCE repeatedly to select the
AUDIO IN mode.
3
Play audio on the external device (refer to
its user manual).

Charge your device

With this radio, you can charge your external
devices, such as your cell phone, MP3 player or
other mobile devices.
Note
•
The maximum current for USB charging is 1A.
•
Charging all devices with this product is not guaranteed.
• Use a USB cable (not supplied) to connect
your device with the clock radio.
» Once the device is recognized, the
charging starts.

Adjust volume

Rotate the VOL knob to increase or
•
decrease the volume level.

Adjust display brightness

Press BRIGHTNESS repeatedly to select
•
different brightness levels.
EN
13