Table of Contents
Advertisement
16.1 SET PATTERN START&STOP
Press Iris Close key, camera begin to memorize run track, included horizontal, vertical
tracking and camera zoom, call preset. Press Iris Close key again, it will stop memory.
Pattern time is 90 seconds and "TRACE: XX"show the time left for tracking.
16.2 RUN THE PATTERN
Press"95+PRESET" can close OSD MENU. The screen will display "PATTERN" when run
PATTERN.
16.3 UP TO TOP MENU
17. AUTO SCAN SETUP
This item for setting the started and end point and speed of Auto scan namely detector
scan. Press Iris Close key and display as follow:
Auto scan: Pan Tilt scanning between LEFT LIMIT and RIGHT LIMIT. The horizontal and
vertical position for LIMIT is alterable.
17.1 LEFT LIMIT TIME
Set the dwell time on LEFT LIMIT position, time bound is 0-60 seconds.
17.2 SAVING LEFT LIMIT
Run the pan tilt to aim point, press "Iris Close" key and this point is memorized as the
LEFT LIMIT position and memorize dwell time.
17.3 RIGHT LIMIT TIME
Set the dwell time on Right Limit position, time bound is 0-60 seconds.
17.4 SAVING RIGHT LIMIT
Run the pan tilt to aim point, press "Iris Close" key and this point is memorized as the
RIGHT LIMIT position and memorize dwell time.
17.5 AUTO SCAN SPEED
Speed scope: 0-64
IRSPD 22X IR SPEED DOME
■LEFT LIMIT TIME:01
SAVING LEFT LIMIT
RIGHT LIMIT TIME:01
SAVING RIGHT LIMIT
AUTO SCAN SPEED:64
TEST THE AUTO SCAN
UP TO TOP MENU
19
Advertisement
Table of Contents
