Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Optiview TRKPTZ-18NX
Summary of Contents for Optiview TRKPTZ-18NX
-
Page 1: User Manual
Auto Zooming Tracking Dome Cameras User Manual... -
Page 2: Table Of Contents
Auto Zooming Tracking Dome Camera User Manual Section1 Instruction ... 3 1.1 Production Introducing ... 3 1.2 Character ... 3 1.3 Function Description ... 4 1.4 Specification Comparison Chart ... 9 Section 2 Normal Operation ... 12 Section 3 Menu Configuration ... 13 3.1 Main Menu ... - Page 3 Auto Zooming Tracking Dome Camera User Manual 3.6.4 Password Setting ... 41 3.6.5 Windows Blanking ... 43 3.6.6 Set Windows ... 44 3.6.7 Edit Windows Location ... 45 3.6.8 Edit Windows Zoom ... 46 3.6.9 Heater Setting ... 47 3.6.10 Cruise Setting ... 48 3.6.11 Tracking Setting ...
-
Page 4: Section1 Instruction
Auto Zooming Tracking Dome Camera User Manual Section1 Instruction 1.1 Production Introducing The dome cameras feature high position resolution, high speed, low price and selectable communication protocols; Widely used in surveillance system. 1.2 Character Built-in English OSD Menu, by which you can change dome parameter, set or call preset, and achieve auto tour, pattern, auto scan etc. -
Page 5: Function Description
Auto Zooming Tracking Dome Camera User Manual The features unauthorized changes to the dome setting. A set window can be reversed so that it is the only visible tilt area of the scene. ll other parts of the tilt area of the scene will be blanked. - Page 6 Auto Zooming Tracking Dome Camera User Manual is a large amount of zoom. (4) Auto Flip When the dome camera tilts downward and goes just beyond the vertical, the dome camera rotates 180 degrees automatically. Afterwards, the dome camera starts moving upward even you still hold joystick in the down position.
- Page 7 Auto Zooming Tracking Dome Camera User Manual Focus can be manually controlled via keyboard or matrix, please refer to control keyboard or matrix operation manual for detailed operation. When on manual focus status, operations such as adjusting positions or preset setting will resume the camera to auto focus status.
- Page 8 Auto Zooming Tracking Dome Camera User Manual Camera can automatically adjust white balance according to the alteration of background lightness to give a true color image. (9) Backlight Compensation (BLC) If a bright backlight presents, the subjects in the picture may appear dark or as a silhouette.
- Page 9 Auto Zooming Tracking Dome Camera User Manual Make the dome position. (15) Frame Scan This feature freezes the scene on the monitor when going to a preset. This allows for smooth transition from one preset scene to another. (16) Zones Setting A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane.
-
Page 10: Specification Comparison Chart
A set window can be reversed so that it is the only visible tilt area of the scene. All other parts of the tilt area of the scene will be blanked. NOTE: Be the same with only the model of TRKPTZ-18NX, TRKPTZ -26NX, TRKPTZ -18NX, TRKPTZ-26NX. (20) Auto tracking... - Page 11 Auto Zooming Tracking Dome Camera User Manual TRKPTZ- Model 1801 Signal Format Image Sensor Horizontal Resolution Video Out P/T Speed S/N Ratio Sensitivity 1Lux IR cut Filter F1.4-F3.0 f=4.1-73.8mm Lens / F1.6-F3.8 f=3.5-91mm TRKPTZ- TRKPTZ- 1802 1803 PAL/NTSC ¼ inch color CCD 1.0±0.2V Pan:0.05º～240º/sec;Tilt:0.03º～160º/sec ≥50DB...
- Page 12 Auto Zooming Tracking Dome Camera User Manual Optical Zoom Digital Zoom Panning Range Preset Number Auto Cruise Auto switch from 1 to 30 preset position sequentially Patterns Zone Alarm input Alarm output Windows blanking Interface Baud Rate 1200bps , 2400bps, 4800bps, 9600bps , 19200bps Address Input voltage Input power...
-
Page 13: Section 2 Normal Operation
Auto Zooming Tracking Dome Camera User Manual Section 2 Normal Operation These operating instructions cover the basic operation of the dome and its features. When the dome is used with other manufacturers‟ control system, please refer to the system controller‟s instructions. In the event of special requirements outside the scope of this document it is prefer to contact your local distributor. -
Page 14: Section 3 Menu Configuration
Auto Zooming Tracking Dome Camera User Manual dome will calls these parameters saved in memoriy and adjust Pan/Tilt/Zoom of the camera to that position. Presets 1 Auto tracking Auto switch sequentially among preset positions Clear all presets positions Select main programming menu Random scanning Frame scanning Start auto scanning... - Page 15 Auto Zooming Tracking Dome Camera User Manual manual. Please refer to the installation packet supplied with the back box for installation instructions. After installed properly, power up the camera. It will start a configuration sequence. After the configuration is done, the monitor will display as below.
-
Page 16: Main Menu
Auto Zooming Tracking Dome Camera User Manual 3.1 Main Menu Set 95# preset to access main menu. RESET CAMERA REBOOT SYSTEM LANGUAGE EXIT Access other OSD menus: (1) Move the joystick up or down to position the cursor beside others OSD menus. (2) Press iris Open to confirm selection. -
Page 17: System Information
Auto Zooming Tracking Dome Camera User Manual (3) Move the joystick up or down to view selections. Press iris Open to confirm selection. All on-screen menus are changed into the selected language. 3.3 System Information Move joystick to select <system information>, press Open to confirm the system information menu shown as Fig 3.2. -
Page 18: Display Setup
Auto Zooming Tracking Dome Camera User Manual (2) Press iris Open. 3.4 Display Setup 3.4.1 Display Setup Move joystick to select <DISPLAY SETUP>, press Open to enter the display setup menu shown as Fig3.3. Display setup enables you to program how labels are displayed on the monitor. -
Page 19: Label Position
Auto Zooming Tracking Dome Camera User Manual ratio label Azimuth/elevation and direction labels are displayed when pan/tilt is activated. The dome label is displayed when the dome label is activated. The following settings are available foe each label: OFF: The label is not displayed when activated. ON: The label shows when activated. -
Page 20: Dome Settings1
Auto Zooming Tracking Dome Camera User Manual 3.5 Dome Settings 1 3.5.1 Dome Settings 1 Move joystick to select <DOME SETTING 1>, press Open to enter the dome setting1 menu shown as Fig3.5. Figure 3.5 Dome settings 1 3.5.2 Camera Settings Move joystick to select <CAMERA>, press Open to enter the camera menu shown as Fig3.6. - Page 21 Auto Zooming Tracking Dome Camera User Manual ZOME LIMIT BACKLIGHT COMP <PROGRAM AE MODE> BACK EXIT ZOOM LIMIT: Zoom limit enables you to define a limitation on zooming times. BACKLIGHT COMPENSATION (BLC): If a bright backlight presents, the subjects in the picture may appear dark or as a silhouette.
- Page 22 Auto Zooming Tracking Dome Camera User Manual AE MODE LOW LIGHT MODE LOW LIGHT LIMIT IRIS LEVEL AGC LEVEL BIRGHT LEVEL BACK EXIT Figure 3.7A PROGRAM AE CORTROL PROGRAM AE MODE IR CUT FILTER INISERT/REMOVE BACK EXIT Figure 3.7 B PROGRAM AE CORTROL Note: Figure 1.7A shows program AE mode, it is only for models names TRKPTZ18XX and TRKPTZ26XX.
- Page 23 Auto Zooming Tracking Dome Camera User Manual LOW LIGHT LIMIT Low light limit is the maximum duration, it is in fractions of a second, that electronic shutter will remain open in low light conditions. The default setting is 1/50. Settings include:1/2, 1/3, 1/6, 1/12, 1/25, 1/50, 1/75, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425, 1/600, 1/1000, 1/1250, 1/1750, 1/2500, 1/3500, 1/6500, 1/10000.
- Page 24 Auto Zooming Tracking Dome Camera User Manual AU+DSS+IR1, AU+DSS+IR2, AU+DSS+IR3, SHUTTER PR, IRIS PRIO, and AGC PRIORI. IR CUT FILTER Settings include: IN and OUT. LOW LIGHT LIMIT Settings include: 1/1.5, 1/3, 1/6, 1/12, 1/25, 1/50. SHUTTER Settings include: 1/30000, 1/10000, 1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/150, 1/100, 1/50, 1/25, 1/12, 1/6, 1/3, 1/1.5.
- Page 25 Auto Zooming Tracking Dome Camera User Manual IR CUT FILTER IR CUT FILTER AUTO IRIS SHARPNESS SHARPNESS LEVEL AUTO WHITE BALANCE ON/OFF R GAIN B GAIN BACK EXIT Figure 3.8A OTHER MENU AUTO IRIS AUTO IRIS LEVEL AUTO IRIS PEAK SHARPNESS SHARPNESS LEVEL AUTO WHITE BALANCE...
- Page 26 Auto Zooming Tracking Dome Camera User Manual closes the iris in response to changing light conditions. Program the auto iris to operate automatically or at a user-defined level. OFF: Auto iris is disabled, and for manually control only. AUTO: The iris is adjusted automatically to produce a constant video output as determined by the Auto Iris level setting.
-
Page 27: Motion Setting
Auto Zooming Tracking Dome Camera User Manual change the value, the color changes on your monitor. 3.5.3 Motion Setting Move joystick to select <MOTION >, press Open to enter the motion menu shown as Fig3.9. AUTO FLIP PROPORTIONAL PAN PARK TIME（MINUTES） PARK ACTION SCAN SPEED（DEG/S）... - Page 28 Auto Zooming Tracking Dome Camera User Manual PROPORTIONAL PAN: Proportional pan automatically reduces or increases the pan and tilt speeds in proportion to the zooming times. At telephoto zoom settings, the pan and tilt speeds will be slower for a given amount of joystick deflection then at wide zoom settings.
- Page 29 Auto Zooming Tracking Dome Camera User Manual PANTTERN 3: Dome runs pattern3. PANTTERN4: Dome runs pattern4. SCAN SPEED: Scan speed is that the dome will pan when in a FRAME SCAN mode. Scan speed is adjustable from 1 to 32 via the programming menu.
-
Page 30: Power Up
Auto Zooming Tracking Dome Camera User Manual (3) Follow the directions displayed on the monitor. SET AZIMUTH ZERO: Azimuth is the pan angle from 0°to 359°.Azimuth zero is the pan position you specify to be the 0°point. Azimuth zero is normally set to magnetic north. -
Page 31: Presets Setting
Auto Zooming Tracking Dome Camera User Manual This setting defines a specific activity (scan, preset, pattern) to be performed after the dome is powered up. Following settings are available: NONE (default): No action. AUTO SCAN: Dome starts auto scan operation. RANDOM SCAN: Dome starts random scan operation. - Page 32 Auto Zooming Tracking Dome Camera User Manual (1) Select preset number: a. Move joystick to position the cursor beside PRESET NUMMBER, press iris Open. b. Move the joystick up or down to view selections. Press iris Open to confirm selection. (2) Edit preset label.
-
Page 33: Patterns Setting
Auto Zooming Tracking Dome Camera User Manual (3) Edit preset scene: a. Move joystick to position the cursor beside EDIT PRESET SCENE. b. Press iris Open. c. Follow the direction displayed on the monitor. (4) Clear a preset: a. Move joystick to position the cursor beside CLEAR PRESET. -
Page 34: Zone Setting
Auto Zooming Tracking Dome Camera User Manual (2) Move the joystick up or down to view selections. Press iris Open to confirm selection. (3) Move joystick to position the cursor beside PROGRAM PATTERN. (4) Press iris Open. (5) Follow the directions displayed on the monitor. After a pattern is programmed, the remaining storage percentage will be displayed on the screen. - Page 35 Auto Zooming Tracking Dome Camera User Manual A zone is pan area, defined by a left and right limit on the 360-degree pan plane. There are altogether eight zones, each can be with a 6-character label. TO program a zone: (1) Move joystick to position the cursor beside ZONE NUMBER.
-
Page 36: Clears Setting
Auto Zooming Tracking Dome Camera User Manual (3) Move joystick to position the cursor beside a character. Press iris Open to confirm selection. To clear a character, position the cursor beside BP, and then press iris Open. (4) When a label is inputted, move the cursor to Ok, then press iris Open to save and return to the Preset menu. -
Page 37: Presets Number
Auto Zooming Tracking Dome Camera User Manual ZONES section. CLEAR PRESETS: Clear all presets. To clear a specific preset, please refer to the PRESETS section. CLEAR PATTERNS: Clear all patterns. To clear a specific pattern, please refer to the PATTERNS section. RESTORE FACTORY DEFAULTS: This is to restore leaving-factory‟s default settings. -
Page 38: Alarms
Auto Zooming Tracking Dome Camera User Manual Figure 3.17 DOME SETTINGS 3.6.1 Alarms Move joystick to select <ALARMS>, then press Open to enter the alarms menu shown as Fig 3.18. ALARM NUMBER SEQUENCE(SECS) < ALARM SETTINGS > <CLEAR SET> BACK EXIT The dome has seven alarm inputs, which can be programmed as high, medium or low priority. -
Page 39: Alarms Setting
Auto Zooming Tracking Dome Camera User Manual This is the length of time the dome considers the alarm to be active after it has physically cleared. 3.6.2 Alarms Setting Move joystick to select <ALARM NUMBER>, then press Open to enter the alarm number menu shown as Fig 3.19. ALARM NUMBER ALARM PRIORITY ALARM ACTION... - Page 40 Auto Zooming Tracking Dome Camera User Manual (2) Press iris Open. (3) Move the joystick up or down to view the available selections. Available settings include HIGH, MEDIUM, and LOW (default). If multiple alarms with different priorities are active at the same time, the dome will only go to the alarms with the highest priority.
-
Page 41: Aux Setting
Auto Zooming Tracking Dome Camera User Manual Set auxiliary to activate: (1) Move joystick to position the cursor beside ACTIVATE AUX. (2) Press iris Open. (3) Move the joystick up or down to view the following available selections. OFF (default): Not activated. 1:An alarm action will close AUX 1. -
Page 42: Password Setting
Auto Zooming Tracking Dome Camera User Manual DWELL TIME<SECS> 1 DWELL TIME<SECS> 2 BACK EXIT An auxiliary output is a programmable signal from the dome back box that can trigger another device to operate. An auxiliary out put is programmable to trigger from an alarm or from a controller. - Page 43 Auto Zooming Tracking Dome Camera User Manual EBABLE PASSWORD <EDIT PASSWORD> BACK EXIT Figure 3.21 PASSWORED This setting protects it from unauthorized changes to the dome settings. ENABLE PASSWORD: Open or close the password features. EDIT PASSWORD (Four Numbers): PLEASE INPUT OLD PASSWORED PASSWORD 1 2 3 4 5 6 7 8 9 0 CLEAR...
-
Page 44: Windows Blanking
Auto Zooming Tracking Dome Camera User Manual 3.6.5 Windows Blanking Move joystick to select <WINDOWS BLANKING>, then press Open to enter the windows blanking menu shown as Fig 3.23. STYLE BLANK ALL ABOVE BALANK ALL BELOW <SET WINDOWS> BACK EXIT Figure 3.22 WINDOWS BLANKING Window blanking enables you to program up to eight, four-sided, user-defined areas that cannot be viewed by the... -
Page 45: Set Windows
Auto Zooming Tracking Dome Camera User Manual Blanking Parameters: BLANK ALL ABOVE No Blanking -5º~95º 3.6.6 Set Windows Move joystick to select <SET WINDOWS>, then press Open to enter the set windows menu shown as Fig 3.24. WINDOWS NUMBER <EDIT WINDOWS LOCATION> <EDIT WINDOW ZOOM >... -
Page 46: Edit Windows Location
Auto Zooming Tracking Dome Camera User Manual blanking <Edit window zoom>: set the zoom of the blanking. The blanking will take effect when the video is zoomed to this time or above. Enable Windows: Enable or disable the current blanking Clear windows: clear the current windows blanking Operation: 1. -
Page 47: Edit Windows Zoom
Auto Zooming Tracking Dome Camera User Manual 2. From the menu of Fig. 3.25, press Close to return to the menu of Fig 3.24 3. From the menu of Fig. 3.25, press Open to enter menu of Fig 3.26 to edit the windows location. Figure 3.26 EDIT WINDOW LOCATION 4. -
Page 48: Heater Setting
Auto Zooming Tracking Dome Camera User Manual Press Close to discard the setting and return to Fig 3.24 Press Open to save the setting and return to Fig 3.24. 3.6.9 Heater Setting From the dome setting 2 menu shown in Fig3.17, move joystick and move cursor to HEATER SETTING, press Open to enter the following menu (Figure 3.28). -
Page 49: Cruise Setting
Auto Zooming Tracking Dome Camera User Manual Temperature set is to set the heater‟s startup temperature. Operations: 1. Move joystick to select an item. 2. Press Open. 3. Move the stick to select a parameter. 4. Press Open. 3.6.10 Cruise Setting From the menu shown in Fig3.17, move joystick to select <CRUISE SETTING>, press Open to enter the following menu. -
Page 50: Tracking Setting
Auto Zooming Tracking Dome Camera User Manual 1 ON 0 OFF: Note, they are not changeable, 1234567890: display info, not changeable. When the preset list is 1, “1, 2, 3, 4, 5, 6, 7, 8, 9, 0” indicates presets from 1 ~ 10. When it is 2, it indicates presets from 11 ~ 20. - Page 51 Auto Zooming Tracking Dome Camera User Manual Size SNS: the size of the target in the screen, Medium, Large, Small are selectable GRAY SNS: the sensitivity of the moving object, Medium, High and Low are selectable LOST AC: the action when the moving object is lost. Parameters include: return home and tracking, keep tracking, stop tracking AUTO ZOOMING: The dome will auto zoom in / out...
-
Page 52: Tracking Boundary
Auto Zooming Tracking Dome Camera User Manual 3.6.12 Tracking Boundary From the menu in Fig3.30, move the cursor to < TRACKING BOUNDRAY >, press Open to enter the following menu (Figure 3.31) BOUNDARY LIMIT CLEAR BOUNDARY LEFT LIMIT RIGHT LIMIT UP LIMIT DOWN LIMIT BACK... -
Page 53: Dome Label
Auto Zooming Tracking Dome Camera User Manual 3.7 Dome Label From the menu shown in Fig3.1, move the cursor to <DOME LABEL>, press Open to enter the following menu (Figure .32) <EDIT DOME LABEL>: To edit the dome description and information.