VXI C ProSet LUX Instructions Manual

HOW TO WEAR AND ADJUST YOUR HEADSET

1. Place the headset on your head.
2. Position the speaker(s) directly on your ear(s). You can slide the headband in or
out of the side support for proper fit.
3. Position the microphone about one finger's width away from your face at the
corner of your mouth. The microphone boom is quite flexible, so you can bend
it toward your mouth as needed for optimum sound quality.
4. The headband is also very flexible and can be adjusted by gently flexing outward
to loosen or inward to tighten.

HOW TO CONNECT YOUR HEADSET

Connecting to your UC ProSet LUX
1. Insert the USB connector into a USB port on your computer (not into the keyboard).
2. Check the audio settings (speaker and microphone) on your softphone and in Windows to ensure that the initial settings are at an appropriate level.

Installing your UC ProSet LUX

For Windows XP or higher: Installation is automatic once inserted into the USB port of your computer.
For Macintosh: Please visit the USB support section at www.vxicorp.com/usb for more information.

FOR MORE INFORMATION

Visit www.vxicorp.com/USB to learn more about the UC ProSet LUX
VXi Headset Instructions
Simple to set up and use.
™
™
Flexible microphone
boom for proper
positioning.
™ presence features.
Gently flex headband
outward or inward to
loosen or tighten fit.
Hook
Volume
Mute