Sanyo VPC-GH3GX Service Manual page 19

AF_I_MID3: ZIM3
ZIM3: infinity adjustment value of focus at zoom position
middle3 (–540<=ZIM3<=133)
AF_I_MID4: ZIM4
ZIM4: infinity adjustment value of focus at zoom position
middle4 (–456<=ZIM4<=175)
AF_I_TELE: ZIT
ZIT: infinity adjustment value of focus at zoom position
tele (–189<=ZIT<=267)
3. AWB Adjustment
Camera
Preparation:
POWER switch: ON
Setting of pattern box:
Color temperature: 3100 ± 20 (K)
Luminance: 900 ± 20 (cd/m
Adjusting method:
1. Set a distance of 0.5-1.0 cm between the pattern box and
the camera. (Do not enter any light.)
2. Double-click on the DscCalDi.exe.
3. Click the AWB, and click the Yes.
4. AWB adjustment value will appear on the screen.
5. Click the OK.
Pattern box
(color viewer)
2 )
Dsc Calibration
AWB Results:
1:
WB=245,482,418
CHECK=128,129,138
MS=2556,2891
Fno_FOR_ISO=-1
SS_FOR_ISO=-1
YLEVEL_FOR_ISO=-1
Adjustment value determination is effectuated using the "WB",
"CHECK" and "MS" values. If
WB = W1, W2, W3
CHECK = wc0, wc1, wc2
MS = ms1, ms2
the adjustment values fulfill the conditions below, they are
determined as within specifications.
Adjustment value determination
200<=w1<=310, 330<=w3<=500
wc0=128 ± 2, wc1=128 ± 2, wc2=150 ± 50
2000<=ms1<=4000, 2500<=ms2<=4500
Adjustment values other than the above are irrelevant.
4. White Point Defect Detect Adjustment
Preparation:
POWER switch: ON
Adjustment method:
1. Double-click on the DscCalDi.exe.
2. Select "CCD Defect" on the LCD "Test", and click the "Yes".
3. After the adjustment is completed, OK will display.
4. Click the OK.
– 19 –
x
OK
Copy