NETGEAR Nighthawk X4SAC2600 Quick Start Manual page 9

b. Plug in and turn on your modem.
If your modem uses a battery backup, put the battery
back in.
c. With an Ethernet cable, connect your modem to the
red Internet port on your modem router.
3. Add power to the modem router:
Modem router
a. Connect the power adapter to the modem router and plug
the power adapter into an outlet.
b. Wait for the Power LED
If the Power LED does not light, press the Power On/Off
button.
c. Wait for the WiFi LED
If the WiFi LED does not light, press the WiFi On/Off
button.
4. Check the DSL LED.
If the modem router is connected to a DSL service, the
DSL LED
Power
adapter
lights white.
to light white.
to light white.
7