Disposal - Stanley STR-4 IN 1 Original Instructions Manual

The grass trimmer does not work
with full power
Cutting thread is not updated
The pruner does not saw pick or
vibrate
Saw chain is hot or saw chain
lubrication does not work

12. Disposal

12. Disposal
Do not simply dispose of equipment, accessories and
packaging into the trash but do it in an environmentally
friendly recycling. So bring your worn out devices
preferably to a best to a recycling centre in your vicinity.
This little effort benefits the environment.
- Cutting thread too short or damaged
- Device is busy, as grass is too high
- Spool of thread empty
Chain tension too high
Chain blunt
- Chain is incorrectly fitted
- Chain worn out
- No oil in the tank
- Oil supply line clogged
- Chain tension too high
- Chain blunt
- Update cutting thread or get it replaced
- Cut grass gradually
Replace spool of thread
- Check chain tension and set it
- Get the chain reground or replaced
- Install chain again
- Replace chain
- Refill oil
- Clean oil supply line
- Adjust the chain tension
- Get the chain reground or replaced
G
B
47