Verifying Hardware Integrity - F5 ARX 4000 Hardware Installation Manual

Verifying Hardware Integrity

prtlndA1k# show version
Copyright (c) 2002-2008 by F5 Acopia Networks Inc. All rights reserved.
Running Release
test3.rel : Version 4.00.000.11094 (Jun
Armed Release
test3.rel : Version 4.00.000.11094 (Jun
Backup Release
test1.rel : Version 4.00.000.11094 (Jun
System Configuration:
prtlndA4k uptime is 0 weeks, 1 days, 12 hours, 5 minutes.
Slot Admin
---- -------
1 Enabled
2 Enabled
Resource State
-------- -------------------------------
Switch Up
prtlndA1k# show chassis
Identification:
Hostname
------------------------------------
prtlndA4k
Chassis:
Chassis Type Model Number
------------ ------------------------------------ -------
ARX-4000 SR2500ALLX
Private Subnet:
VLAN Subnet
---- ----------------
1004 169.254.226.0
Base MAC Address Power
----------------- --------------
00:0a:49:17:78:00 Online
ARX®4000 Hardware Installation Guide
When the switch reboots and the system powers up, POST (power-on
self-test) diagnostics run to verify basic hardware integrity. You can view
any hardware failures at the system console through the
commands. These commands are documented fully in the ARX
show chassis
CLI Reference. For details, see the
commands.
See the following sample output for the
6 2008 16:20:48) [nbuilds]
6 2008 16:20:48) [nbuilds]
6 2008 16:20:48) [nbuilds]
Version 400000.6
ModuleType
------------
ACM
NSM
See the following sample output for the
UUID
--------------------------------------
876616f6-79ac-11d8-946f-958fcb4e6e35
Subnet Mask
----------------
255.255.255.0
Fan(setting)
-------------
Online
Verifying Hardware Integrity
and
show version
show version
ModuleState
----------------
Online
Online
show chassis
HW Ver. Serial
-------------
03002145
Temperature
-------------
Normal(<45 C)
or
show version
show chassis
command:
FW Upgrade
----------
Disabled
Disabled
Forwarding
----------
Disabled
command:
7 - 3