F5 ARX 4000 Hardware Installation Manual page 44

Chapter 4
Switch Hardware and Functions
4 - 8
Table 4.1 Control Panel LED and Button Functions (Continued)
Callout Feature
C Power/Sleep
Button
D Power/Sleep
LED
E Disk Drive
Activity LED
F System Status
LED
G System
Identification
LED
H System
Identification
Button
I Reset Button
J USB 2.0 Port
K NMI Button
L Video Port
Function
Push and hold until the system powers up or down
(if the system is up).
Continuous green indicates that power has been
applied to the system.
Blinking green indicates the system is in S1 sleep
state.
No light indicates the power is off.
Random blinking green light indicates hard disk
drive activity.
Solid green indicates normal operation.
Blinking green indicates degraded performance.
Solid amber indicates a critical or non-recoverable
condition.
Blinking amber indicates a non-critical condition.
No light indicates POST is running or the system is
off.
Solid blue indicates system identification is active.
No light indicates system identification is not
activated.
Solid blue indicates system identification is active.
No light indicates system identification is not
activated.
Reboots and initializes the system.
Enables attaching a USB component to the front of
the CP. Do not use. Factory-use only.
Halts the server for diagnostic purposes. Do not
use. Factory-use only.
Enables attaching of a video monitor to the front of
the CP. Do not use. Factory-use only.